TPI SILICA FUME MS92 – Active mineral additive (SiO2 ≥ 92%)
Powdered concrete admixtures are used in structural concrete, precast concrete, and other applications requiring the quality of fresh concrete and high-strength concrete. Advantages:
• Reach high intensity early, increase intensity at the end.
• Significantly increases abrasion resistance, sulfate resistance, and water repellency.
Dosage: 1-5% cement weight
Pack: Bags of 25kg / 50kg / 1000kg.
TPI SKIMCOAT – Smooth plaster for wall and ceiling surfaces
This is a high-quality cement-based surface coating material used to create a smooth finish for walls and ceilings with high adhesion. It is suitable for indoor and outdoor surfaces such as concrete, lightweight concrete, precast concrete slabs, brick walls, undersides of arches, block walls, autoclaved aerated concrete blocks, and plaster.
Water dilution ratio: 28 – 30% (by weight) ~ 5.6 – 6.0 liters of clean water for 1 bag of 20 kg powder
Pack: 20kg bag
TECHNICAL DOCUMENTATION
TPI SP1C – Premium water-reducing admixture for concrete
Superplasticizers for the production of flowable and water-reducing concrete to achieve high early strength for various applications:
• Floor slabs and foundations
• Walls, columns, and bridge piers. Thin structural elements with high reinforcement density.
• Precast and prestressed components. Cantilever bridges and structures.
Dosage: 0.8 – 1.2% by weight of cement
Pack: 25-liter / 200-liter / 1000-liter drums
TPI SPR4 – High-level water-reducing and slow-setting additive
Suitable for ready-mix concrete production and on-site batching plants. TPI SPR4 can be used for:
• Concrete is transported over long distances; it's used for road construction.
• Slipform concrete. Thin elements with high steel reinforcement density.
• Foundations, floor slabs, walls, columns, beams, girders
Dosage:
• 0.6-1.6 liters / 100 kg of cement
• Common usage: 0.8-1.2 liters / 100 kg of cement
Pack: 25-liter / 200-liter / 1000-liter drums
TPI THINJOINT E33 – Pre-packaged lightweight brick mortar, cement-based.
TPI ThinJoint E33 This is a high-quality cement-based adhesive mortar specifically designed for bonding autoclaved aerated concrete (ALC) panels, autoclaved aerated concrete (AAC) blocks, and panel systems. The product is suitable for both indoor and outdoor applications.
Compressive strength: ≥ 7.5 Mpa (28 days)
Water dilution ratio: 22 – 25% (by weight) ~ 5.5 – 6.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI TO9 – Dry Pressed Concrete Release Agent
TPI TO9 is used for demolding dry concrete products made using extrusion and vibration-pressing technology.
• Sewer pipes and concrete structures.
• Interlocking tiles, decorative tiles.
• Tiles and concrete products.
• Acotec concrete slabs.
• Mixing ratio: 1:60 in kerosene or diesel fuel (DO).
• Packaging: 25-liter / 200-liter / 1000-liter drums.
TPI WB-102 – Multipurpose mold release agent (water-based)
Creates a non-stick film between the concrete surface and the mold., TPI WB-102 Suitable for the following types of molds:
• Production of centrifugal concrete piles and poles for electricity
• Production of concrete pipe jacks
• Manufacturing of sheet piles, square concrete piles, and cement- and concrete-based materials.
• Dilution ratio: 5 – 15 times water.
• Packaging: 25-liter / 200-liter / 1000-liter drums.
