TPI SEAL 102 – Cement-based floor waterproofing

TPI Seal 102 (Floor)
High-grade cement-based floor waterproofing agent

DESCRIPTION OF TPI SEAL 102 (FLOOR)

It is a high-quality, pre-packaged liquid waterproofing agent containing special additives and selected aggregates. When mixed with cement, it forms a waterproofing mortar used to seal pores and capillaries on concrete surfaces as well as cement-based surfaces.

TPI SEAL 102 APPLICATION

Suitable for waterproofing civil engineering structures such as:

• Concrete roof, balcony, terrace.
• Basement, water tank, swimming pool.
• The bathroom floor area, a wet area.
• Wall and floor surfaces.

ADVANTAGES OF TPI SEAL 102

• It effectively prevents water from penetrating from the outside, providing a very high level of waterproofing.
• Economical. Easy to mix, easy to apply. It is a water-based liquid product used for waterproofing cement mortar and concrete in the form of a mixture with cement at a 1:1 ratio.
• Its high fluidity makes it easy to apply with a brush, trowel, or spray machine.
• It adheres well to both mortar and concrete surfaces.

High durability, maintaining good quality for over 15 years. Non-flammable, non-toxic, free of lead, mercury, and other harmful chemicals, safe for people.

SPECIFICATIONS

(*) Depending on the surface and application technique.

INSTRUCTIONS FOR USE

Surface preparation

• The surface must be thoroughly cleaned of dust and grease before waterproofing.

• Repair any cracks or defects on the concrete or cement surface before applying waterproofing.
• Moisten the waterproof floor surface with water.

Prepare the product.

• Stir the liquid and sand components of the product thoroughly before use.
• Estimate the amount of waterproofing needed. TPI Seal 102 (Floor) To prepare, mix and reseal the product when not in use.
• Mixing ratio Waterproofing ratio: 1kg cement : 0.5 L water : 1kg TPI Seal 102 (Floor).

Use

• Apply 2-3 coats to the surface using a brush, roller, or roller. Allow 4-6 hours between each coat.
• Protect the waterproofing layer from contact with water for 60-120 minutes until it is dry to the touch.

Toilet

• Clean the equipment and tools before use. TPI Seal 102 (Floor) Once dry, rinse with clean water.
• After TPI Seal 102 (Floor) Once it has hardened, it can only be cleaned by mechanical means.

Notes on construction

• The mixture must be used within 1 hour after preparation; mix only the amount needed for immediate use.
• The waterproof surface must be allowed to dry for at least 5 days before any other work is carried out.
• Waterproofing agent TPI Seal 102 (Floor) It reaches its maximum hardness after 7 days.
• Waterproofing agent TPI Seal 102 (Floor) It can withstand slight reverse pressure if constructed in 3 layers (in locations such as: swimming pools, water tanks, basement floors, and wall bases).
• An additional layer of fiberglass fabric should be used to minimize cracking at the joints between walls and floors, ensuring the surface is completely dry.
• To protect the waterproofing layer TPI Seal 102 (Floor), Therefore, a layer of cement mortar should be applied on top. This mortar layer should be mixed with additional mortar. TPI Latex proportionally 5 liters of TPI Latex per 1 m²³ cement mortar block.

HEALTH AND SAFETY INFORMATION

Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, must be worn when using this product.

Ecology: Do not dispose of into water sources or soil.

Transport: Not dangerous.

Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.

NOTE

The information provided in this document is reliable and based on TPI's technical data. This information is intended for technically skilled individuals only and they perform the work at their own risk. The product information in this technical document conforms to the detailed recommendations and specifications for product application as of the date of publication. TPI is not responsible for any errors due to workmanship, engineering, or design in any project. To ensure you are using the most up-to-date and complete information, please contact TPI.

See also TPI Seal 100 – Cement-based wall waterproofing