TPI AQUASIL 100 – Transparent water-based waterproofing (lotus leaf effect)

TPI Aquasil 100
Transparent water-based waterproofing (lotus leaf effect)

SCOPE OF USE

Used as a transparent, waterproof protective coating for exterior surfaces of concrete, mortar, cement masonry, brick masonry, concrete blocks, ACC autoclaved aerated concrete blocks, ALC panels, fired clay bricks and tiles, natural and artificial stone, etc.

Typical applications

• Repair exterior wall coatings that are regularly exposed to rainwater.
• It is used as a transparent protective coating for ancient buildings of architectural value.
• Anti-mold and mildew properties, along with UV protection, help preserve the product's color.
• Apply a waterproof coating to protect walls, brick walls, and walls clad with natural stone.

TECHNICAL SPECIFICATIONS

TPI AQUASIL 100 It is a milky white liquid with a nano-silica base, capable of penetrating deep into mineral materials in construction.

When applying to porous surfaces, TPI AQUASIL 100 It penetrates deeply and reacts with natural moisture to form a waterproof layer inside the pores and tiny capillaries. Waterproof surface thickness: 0.1 mm – 10 mm (depending on the material and concentration used).

TPI AQUASIL 100 It has the ability to resist the penetration of chemical agents present in rainwater into the structure without affecting the color of the cladding material.

TPI AQUASIL 100 It does not form a film on the surface, thus not affecting the product's breathability or aesthetics.

TPI AQUASIL 100 It has excellent resistance to alkaline elements present in the mineral composition of cement.

SPECIFICATIONS

Target	Parameter
Origin	Silica
Type / color	The colored solution
pH level	6 – 7
Density	1.10 ± 0.05 kg/liter
Materials used	Water dilution ratio	Standard
– Concrete	1:5 ~ 1:15	~ 10 – 15 m2/L
– Cement mortar	1:5 ~ 1:15	~ 10 – 20 m2/L
– Fired clay bricks/tiles	1:5 ~ 1:30	~ 5 – 30 m2/L
– Painted surface	1:5 ~ 1:20	~ 8 – 20 m2/L
– Stone / Glass	1:5 ~ 1:15	~ 15 – 30 m2/L
- Wood	1:5 ~ 1:15	~ 15 – 30 m2/L
Specifications	5L / 25L containers
Expiry	6 months
Storage	Store in a cool, shaded place. Keep the lid tightly closed after use.

RECOMMENDED

TPI AQUASIL 100 Not suitable for waterproofing:

Horizontal surfaces (steps). l Water tanks, concrete foundations l Elevator shafts and pressurized water areas.

• Plaster surface.
• The surface is filled with synthetic resin and decorated with synthetic paint.

PRODUCT INSTALLATION INSTRUCTIONS

Surface preparation:

Before application, all dust, grease, paint, mold, and other contaminants must be removed from the application surface to ensure proper penetration. TPI AQUASIL 100.

For old surfaces, the choice of cleaning method depends on the type of soiling. Cold water should be used to rinse the surface. For surfaces with grease or oil, hot water or steam should be used.

The product should only be applied to completely dry surfaces. If the surface is still wet, the product will have difficulty penetrating the material.

Product preparation:

TPI AQUASIL 100 It is a concentrated product, to be diluted with water according to the ratio specified in the technical data sheet.

TPI AQUASIL 100 installation:

Effectiveness and durability of the waterproofing layer TPI AQUASIL 100 This depends on the absorbency of the primer. This parameter directly depends on the absorbency of the material being treated and the amount of product applied.

For construction TPI AQUASIL 100 To achieve a smooth surface, use a misting device.

The product also acts as a primer, allowing the topcoat to be applied to the surface of the material.

Construction TPI AQUASIL 100 Continue applying until the surface is saturated by applying the next coat while the previous coat is still wet.

Effect duration:

After the coating is applied. TPI AQUASIL 100, You need to wait for the material surface to dry completely (or after 7-14 days) to achieve the best effect.

Toilet:

Use water to rinse the utensils.

Construction notes/Limitations:

The appropriate number of coating layers should be tested to ensure satisfactory results.

HEALTH AND SAFETY INFORMATION

• Ecology: Do not dispose of into water sources or soil.
• Transport: Not dangerous.
• Dispose of waste: According to local regulations.

Important note:

TPI AQUASIL 100 May cause allergic reactions. Appropriate precautions should be taken to minimize skin contact. If the product splashes into the eyes or mucous membranes, rinse with clean water and seek medical attention immediately.