TPI GROUT 60 – Multipurpose cement-based grout, shrinkage compensating (>60 Mpa)

TPI Grout 60
Multipurpose cement-based grout, shrinkage compensating (>60 Mpa)

DESCRIBE

TPI Grout 60 It is a ready-mixed, non-shrink, cement-based grout with self-leveling and self-compacting properties, made with selected natural aggregates.

TPI Grout 60 This allows for extended construction time, with high early and final strength.

APPLICATION OF TPI GROUT 60

TPI Grout 60 Used for the following applications:

• Machine bases, pedestals, and columns.
• Locations in precast concrete panels and beams.
• Bridge cushions.
• Anchor bolts and beams.
• Foundation.
• Repair work.

ADVANTAGE TPI GROUT 60

• Easy to use, just mix with water.
• High early intensity helps save time when installing new equipment and components.
• High ultimate strength ensures long-term durability under static and dynamic loads.
• Good fluidity makes it easy to pour grout into complex spaces.
• No water separation. No shrinkage. Ensures tight packing during use.
• Non-toxic, does not increase the chlorine content of the structure.
• Resistant to impact and vibration.
• It can be pumped using a suitable grout pump.

SPECIFICATIONS

Target	TPI Grout 60
Ingredient	Cement and additives
Shape/Color	Cement gray powder
Density	Bulk density of powder: ~1.60 kg/liter The bulk density of freshly mixed mortar: ~2.20 kg/liter
Compressive strength (ASTM C349)	1 day: ≥ 25Mpa 3 days: ≥ 40Mpa 7 days: ≥ 50Mpa 28 days: ≥ 60Mpa
Flow (ASTM C230)	23 – 35 cm
Expansion (ASTM C940)	≥ 0.1%
Freezing time (ASTM C403)	Start time: ≥ 5 hours End time: ≤ 12 hours
Construction temperature	10 – 40oC
Water mixing ratio	11-13% (by weight) Approximately 2.75 – 3.25 liters of clean water are needed for one 25 kg bag of powder.
Standard	A 25kg bag yields 0.014m³.3 or 73 bags to make 1 meter3 mortar
Specifications	25 kg bag
Expiry	12 months (when unopened)
Storage	A cool, dry, shady place.

INSTRUCTIONS FOR USE TPI GROUT 60

Surface preparation:

• The concrete surface must be clean, solid, free of oil, grease, impurities, and other loose components.
• Metal surfaces (iron, steel) must be free of scale, rust, or grease.
• Absorbent surfaces must be completely saturated, but without standing water.

Mix the products:

• The powder is added gradually to the pre-measured container of water until the desired consistency is achieved.
• When using an electric mixer, mix at a low speed (maximum 500 rpm) for at least 3 minutes until a smooth, creamy mixture is achieved.

Product installation:

• Wet the entire surface with water, but avoid letting water pool in the bolt holes.
• Pour the grout immediately after mixing. It is possible to pour the grout into the bolt holes first, then pour it into the machine base afterwards.
• It is essential to ensure that all air bubbles in the mortar are removed.
• When pouring grout into the machine base or beneath the base plate, ensure that pressure is maintained to keep the grout flowing continuously. Ensure that the formwork is securely erected and watertight.
• To achieve optimal expansion, the grout should be poured as quickly as possible.

Maintenance:

• Keep the exposed surface area of the mortar as small as possible and protect the mortar from premature water loss using standard curing methods.
• A minimum curing time of 3 days is required for exposed plaster surfaces.
• The minimum application temperature is 10°C. If the application temperature is below 20°C, the setting time and strength will be slower.

Toilet:

• Rinse tools thoroughly with water immediately after use. Hardened mortar can only be removed by mechanical means.

HEALTH AND SAFETY INFORMATION

Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, should be worn when using this product. It may cause allergic reactions upon contact with eyes, skin, or mucous membranes. Ecology: Do not dispose of into water sources or soil.

Transport: Not dangerous.

Important note

TPI Grout 60 Because it has a cement base, it is alkaline. Care should be taken to minimize direct contact with skin. If the product gets into the eyes, rinse immediately with clean water and consult a doctor.

Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.