TPI CLEAR COAT – Premium water-based gloss paint

TPI Clear Market 
High-gloss water-based premium finish

Describe

TPI Clear Coat is a water-based polymer-modified product with high gloss, dust-repellent, and easy-to-clean properties. It is designed to create a glossy coating and provide surface protection for materials directly exposed to sunlight, offering high durability and suitability for tropical climates.

TPI Clear Market app

A glossy coating and surface protection layer for materials such as:

• Decorative paint finishes such as interior and exterior wall paint, faux stone paint, textured paint, and wood grain paint enhance the beauty of this type of paint.
• Cement and concrete surfaces (interior and exterior). Ceramics and clay.
• Increases the washability and dust-repelling properties of the material surface.
• Standard: 0.1 – 0.2 kg / m2 / layer
• Pack: 5 kg / 20 kg box

Advantage

• One ingredient, easy to use.
• Water-based products are safe for health.
• Enhancing the mechanical properties of the coating material surface.
• Creates a high-gloss coating.
• Excellent resistance to dirt and grime.
• Excellent resistance to water stains.
• High coating durability and resistance to pollen formation on the material surface.
• High weather resistance

User manual

Surface preparation:

• The surface to be painted must be clean and free of dust and grease.
• The recommended surface moisture level is below 16%.
• Product preparation: Stir the product well before use.

Use:

• Apply 1-2 coats to the surface of the material using a brush, roller, or spray gun.
• Protect the paint from contact with water for 60-120 minutes until it is dry enough to touch.
• Once dry, the paint layer will not be affected by water or rain.

Toilet:

• Clean the equipment and tools before use. TPI Clear Market Once dry, rinse with clean water.
• After TPI Clear Market Once it has hardened, it can only be cleaned by mechanical means.

Notes on construction:

• We propose constructing two layers to ensure quality.
• If applying over a special paint surface, allow the special paint layers to dry completely before applying the Clear coat (approximately 24-48 hours).
• Do not attempt to use the product when water or rain is in direct contact with the painted surface before the paint coating is completely dry.
• Only mix a maximum of 10% with water for easier application.