TECHNICAL DOCUMENTATIONTPI Seal 100 (wall)
Waterproofing cement-based walls
DESCRIBE
TPI Seal 100 This is a liquid waterproofing product formulated from special resins and additives. After mixing with cement, it forms a waterproofing mortar used to seal pores and capillaries on vertical concrete or cement mortar wall surfaces.
TPI SEAL 100 APPLICATION
TPI Seal 100 Suitable for preventing water penetration on vertical wall surfaces in civil and high-rise buildings directly exposed to rain and sunlight outdoors.
ADVANTAGE
- Easy to mix, easy to apply.
- Economic efficiency.
- Protect the walls and prevent water from seeping in from the outside.
- Its high fluidity makes it easy to apply with a brush, roller, or spray machine.
- It adheres well to both mortar and concrete surfaces.
- High durability, maintaining good quality even after more than 15 years.
- Non-flammable, non-toxic, and free of lead, mercury, and other harmful chemicals, it is safe for both installers and users.
- Environmentally friendly.
SPECIFICATIONS
| Target | TPI Seal 100 |
| Ingredient | Acrylic polymer and additives |
| Shape/Color | Milky white solution |
| Finish color | Gray, white...(*) |
| Proportion | 1.15 ± 0.03 kg/liter |
| pH level | 7 – 9 |
| Standard | 2.0 – 2.5 m2 ⁄ kg ⁄ 2 layers (**) |
| Application surface | Concrete walls, cement mortar |
| Surface drying time | 2 hours (depending on environmental conditions) |
| Number of coating layers | 2-3 layers |
| Specifications | 5kg & 20kg boxes |
| Expiry | 24 months (when unopened) |
| Storage | The packaging must be intact, unopened, and undamaged.
A cool, dry, shady place. |
(*) Depending on the color of the cement or powder mixture.
(**) Depending on the surface and application technique.
INSTRUCTIONS FOR USE
Surface preparation
- The surface must be thoroughly cleaned of dust and grease before waterproofing.
- Repair any cracks or defects on the concrete or cement surface before applying waterproofing.
- Moisten the waterproof wall surface with water.
Product standards
- Stir the product thoroughly after opening the container.
- Estimate the amount of waterproofing needed. TPI Seal 100 To prepare, mix and reseal the product when not in use.
- Mixing ratio Waterproofing ratio: 1kg cement : 0.5 L water : 1kg TPI Seal 100
Mix the products
- Gradually add cement and water and mix thoroughly to obtain a homogeneous mortar mixture. Then, add TPI Seal 100 to the mortar mixture and mix evenly for 3-5 minutes with a low-speed mixer (below 500 rpm).
- The mixture must be used within 1 hour after preparation; mix only the amount needed for immediate use.
Use
- Apply 2-3 coats to the surface using a brush, roller, or roller. Allow 6-8 hours between each coat.
- Protect the waterproofing layer from contact with water for 60-120 minutes until it is dry to the touch.
Toilet
- Clean the equipment and tools before use. TPI Seal 100 Once dry, rinse with clean water.
- After TPI Seal 100 Once it has hardened, it can only be cleaned by mechanical means.
Notes on construction
- The waterproof surface must be allowed to dry for at least 2 days before applying putty, mastic, or paint.
- Waterproofing layer TPI Seal 100 It will reach its maximum hardness after 7 days.
- Waterproofing agent TPI Seal 100 It will withstand slight reverse pressure if constructed in 3 layers (in locations such as basements and wall bases).
HEALTH AND SAFETY INFORMATION
Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, must be worn when using this product.
Transport: Not dangerous.
Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.
Reviews
There are no reviews yet.