TPI SKIMCOAT – Smooth plaster for wall and ceiling surfaces

TPI Skimcoat
Smooth plaster for wall and ceiling surfaces.

TPI SKIMCOAT DESCRIPTION

This product is a premium cement-based surface coating material, specially formulated for use as a coating on walls and ceilings. Upon application, it forms a smooth architectural coating with excellent adhesion, suitable for both indoor and outdoor applications.

APPLICATION TPI SKIMCOAT

The product is suitable for surfaces such as concrete, lightweight concrete floors, precast concrete slabs, brick walls, the underside of arches, block walls, autoclaved aerated concrete blocks, and plaster.

ADVANTAGE

• Easy to transport and use, just mix with water.
• Excellent adhesion strength.
• Minimize shrinkage cracking.
• Consistent quality.
• Weather resistant.
• No putty is needed before applying a textured primer.

SPECIFICATIONS

Target	TPI Skimcoat
Ingredient	Cement, limestone powder, additives…
Shape/Color	Cement gray powder
Proportion	1,400 – 1,600 kg/m3
Compressive strength	≥ 5 Mpa (14 days)
Adhesion strength	≥ 0.5 Mpa (7 days) ≥ 0.7 Mpa (14 days)
Water mixing ratio	28 – 30% (by weight) Approximately 5.6 – 6.0 liters of clean water are needed for one 25 kg bag of powder.
Layer thickness	Minimum: 1 mm (per layer) Maximum: 3 mm (per layer)
Standard	13 – 15 m²/mm / 20 kg bag
Construction temperature	10 – 35oC
Construction time	30-45 minutes
Waiting time / coating	Before painting: 7 days
Specifications	20 kg bag
Expiry	12 months (when unopened)
Storage	A cool, dry, shady place.

INSTRUCTIONS FOR USE

Surface preparation

• The surface must be solid, clean, and free of oil, grease, dirt, and other contaminants that could affect adhesion. Dry surfaces must be moistened before application. TPI Skimcoat.

Mix the products

• Pour the flour in slowly. TPI Skimcoat Add 5.6 – 6.0 liters of clean water to the container and mix thoroughly with a hand mixer or mechanical mixer for 3 – 5 minutes until a homogeneous mixture is achieved.

Product manufacturing

• Use a steel trowel to apply the mixture. TPI Skimcoat Apply to the surface. Apply in layers with a thickness of 1-3 mm per layer as recommended, applying multiple layers to achieve the required total thickness (maximum thickness is 6 mm).
• Make sure the surface TPI Skimcoat It must be dry before applying the next layer.
• The surface can be finished. TPI Skimcoat Use a soft brush or smooth it out with a trowel.
• Freshly mixed mortar should be used up within the material's working timeframe.

 Notes on construction

• There are precautions in place to protect the construction site from direct sunlight as well as rain or strong winds.
• Do not mix with less or more water than recommended.

Toilet

• Rinse tools thoroughly with water immediately after use. Hardened mortar can only be removed by mechanical means.

HEALTH AND SAFETY INFORMATION

Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, should be worn when using this product. It may cause allergic reactions upon contact with eyes, skin, or mucous membranes. Ecology: Do not dispose of into water sources or soil.

Transport: Not dangerous.

Important note

TPI Skimcoat Because it has a cement base, it is alkaline. Care should be taken to minimize direct contact with skin. If the product gets into the eyes, rinse immediately with clean water and consult a doctor.

Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.