TECHNICAL DOCUMENTATIONTPI Mortar GP 100
Multipurpose pre-mixed dry mortar, Grade 100#
DESCRIPTION OF TPI MORTAR GP 100 DRY MORTAR
TPI Mortar GP 100 This is a high-quality dry mortar, grade 100#, pre-mixed and packaged at the factory. Its main components include a polymer cement binder mixture, selected dried sand (free from mud, clay, and harmful impurities), and other multi-functional additives.
APPLICATIONS OF TPI MORTAR GP 100 DRY MORTAR
TPI Mortar GP 100 This is a multi-purpose, ready-mixed dry mortar, grade 100#, specifically designed for laying regular bricks, plastering/spraying walls, and covering floors indoors and outdoors.
ADVANTAGES OF TPI MORTAR GP 100 DRY MORTAR
- Mortar free of impurities has a lifespan 2-3 times longer than traditional mortar.
- Easy to use, reduces construction time due to pre-selected aggregates.
- Reduce the time spent cleaning and transporting waste out of the building.
- Suitable for indoor and outdoor use.
- Cost savings on materials due to better proportioning compared to traditional mortar.
- Environmentally friendly.
SPECIFICATIONS
| Target | TPI Mortar GP 100 |
| Ingredient | Cement, sand, additives… |
| Shape/Color | Cement gray powder |
| Proportion | 1,600 – 1,800 kg/m3 |
| Compressive strength | ≥ 10.0 Mpa (28 days) |
| Water mixing ratio | 18 – 20% (by weight)
Approximately 4.5 – 5.0 liters of clean water per 25 kg bag of powder. |
| Standard | Consumption depends on the surface roughness of the substrate. Coverage: ~21 kg/1m²/1 cm thickness. |
| Construction temperature | 8 – 40oC |
| Specifications | 25 kg bag |
| Expiry | 12 months (when unopened) |
| Storage | A cool, dry, shady place. |
INSTRUCTIONS FOR USE
Surface preparation
- The surface must be solid, clean, and free of oil, grease, dirt, and other contaminants that could affect adhesion. Remove any loose or adherent material using sandblasting or high-pressure water jetting. The absorbent surface must be saturated with water, and no standing water should be allowed on the substrate.
Mix the products
- Pour the flour in slowly. TPI Mortar GP 100 Pour 4.5 – 5.0 liters of clean water into a container and mix thoroughly with a mixer for 3-5 minutes until a homogeneous mixture is formed. Then, let it stand for 1-2 minutes to allow the compounds in the mixture to react with each other, mix again for 1 minute, and then use.
Product manufacturing
- Use a foam trowel to apply and smooth the mortar finish.
Toilet
Rinse tools thoroughly with water immediately after use. Hardened mortar can only be removed by mechanical means.
HEALTH AND SAFETY INFORMATION
Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, should be worn when using this product. It may cause allergic reactions upon contact with eyes, skin, or mucous membranes. Ecology: Do not dispose of into water sources or soil.
Transport: Not dangerous.
Important note
TPI Mortar GP 100 Because it is cement-based, it is alkaline. Care should be taken to minimize direct contact with skin. If the product gets into the eyes, rinse immediately with clean water and consult a doctor. Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.
Reviews
There are no reviews yet.