TPI LITE – Waterproofing additive for mortar with high workability.

TPI Lite
Waterproofing additive for plaster with high workability.

DESCRIBE

TPI Lite TPI Lite is a ready-to-use, liquid waterproofing compound. It reacts with the components in the sand-cement mixture to seal capillaries and voids in the concrete. While sealing prevents water penetration, the substrate surface continues to breathe.

APPLICATION

TPI Lite It forms the basic substrate for TPI plastering systems, making it very suitable for waterproofing mortar structures in areas where hydrostatic pressure is not clearly defined.

ADVANTAGE

• Reduce water absorption
• Increase water resistance
• Improve construction efficiency.
• Non-toxic
• There is no chloride.

SPECIFICATIONS

INSTRUCTIONS FOR USE

Surface preparation:

• For plastering: The concrete surface must be roughened by chiseling, wire brushing, sandblasting, etc. Exposed reinforcement, pipe joints, and other protrusions must be cut off. Cracks and voids must be chiseled, cleaned, and repaired.
• Areas with water leaks must be treated before applying the bonding layer. A bonding layer such as a TPI waterproofing bonding agent (water, TPI Latex P100, cement) should be used. For more details on bonding agents, please refer to the user manual. TPI Latex P100.

Product preparation:

• Dosage: Mix 1-2% TPI Lite The weight of the cement in the mortar results in a consistency suitable for trowel application.
• Product mixing order: Add TPI Lite Add the product to the clean mixing water before adding it to the dry cement:sand mixture.

Construction method:

• Applying the plaster layer TPI Lite While the bonding layer is still wet, apply each layer with a thickness of 6–10 mm and finish with a wooden trowel.
• It is best to apply the second coat when the first coat has begun to harden (usually 4-5 hours).
• Maintenance: Appropriate maintenance methods, as with other cement-based products, are required.

HEALTH AND SAFETY INFORMATION

Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, must be worn when using this product.

Ecology: Do not dispose of into water sources or soil.

Transport: Not dangerous.

Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.

NOTE: The information provided in this document is reliable and based on TPI's technical data. This information is intended for technically skilled individuals only and they perform the work at their own risk. The product information in this technical document conforms to the detailed recommendations and specifications for product application as of the date of publication. TPI is not responsible for any errors due to workmanship, engineering, or design in any project. To ensure you are using the most up-to-date and complete information, please contact TPI.AI-powered simplification