TPI AQUA PRIMER – Water-based bonding and waterproofing primer

TPI Aqua Primer
Water-based bonding and waterproofing lining

TPI AQUA PRIMER DESCRIPTION

It is a water-based acrylic polymer primer. It is commonly used as a primer in waterproofing and as a coating for floor construction on both absorbent and non-absorbent surfaces.

APPLICATION TPI AQUA PRIME

Primarily used as a bonding primer for penetrating crystalline waterproofing coatings, polyurethane-based waterproofing coatings on concrete, mortar, plaster, etc. surfaces.

*See more polyurethane-based waterproofing products. TPI PU21 – High-elasticity liquid waterproofing membrane

TPI Aqua Primer It can be used on damp surfaces. Additionally, the product can be used to increase adhesion between waterproofing layers if the application time between layers is extended.

ADVANTAGE TPI AQUA PRIME

• Easy to apply (using a brush, roller, or spray gun).
• It can be applied to damp surfaces without reducing adhesion.
• Waterproof.
• Improve the tensile strength and adhesion of the waterproofing material layer.
• Prevents dust accumulation.
• Helps reduce the formation of air bubbles on polyurethane waterproofing layers.
• Non-toxic.
• There is no chloride.

SPECIFICATIONS

INSTRUCTIONS FOR USE

Surface preparation:

• Careful surface preparation is essential for achieving optimal and lasting results.
• The surface must be clean and smooth, free of contaminants that could affect the adhesion of the primer.
• Old coatings, dirt, grease, oil, organic matter, and dust need to be removed by a grinder.
• Uneven or concave surfaces must be leveled. Any loose material and abrasive dust must be thoroughly removed.

Note: Do not use sandblasting as it can affect the surface's integrity and create surface imperfections.

How to use the product:

• Stir the product well before use.
• Construction of the layer TPI Aqua Primer Use a brush, roller, or spray gun until the surface is completely covered.

Important note:

• For best results, the temperature during application should be around 5°C.^oC – 35^oC.
• Low temperatures can slow down the drying process of the liner. TPI Aqua Primer while high temperatures accelerate the drying process of the surface.
• High humidity can affect the final result. Do not apply in areas where water will accumulate.
• The next coat or polyurethane waterproofing layer should be applied after approximately 1-2 hours while the primer is still tacky. If the waiting time is 2-3 days, it is necessary to check and apply another primer coat to ensure quality.
• Keep the lid tightly closed when not in use.

HEALTH AND SAFETY INFORMATION

Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, must be worn when using this product.

Ecology: Do not dispose of into water sources or soil.

Transport: Not dangerous.

Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.

NOTE: The information provided in this document is reliable and based on TPI's technical data. This information is intended for technically skilled individuals only and they perform the work at their own risk. The product information in this technical document conforms to the detailed recommendations and specifications for product application as of the date of publication. TPI is not responsible for any errors due to workmanship, engineering, or design in any project. To ensure you are using the most up-to-date and complete information, please contact TPI.