TECHNICAL DOCUMENTATIONTPI Mortar GP 75
Multipurpose pre-mixed dry mortar, Grade 75#
DESCRIPTION OF TPI MORTAR GP75
TPI Mortar GP 75 This is a high-quality dry mortar, grade 75#, pre-mixed and packaged at the factory. Its main components include a polymer cement binder mixture, selected dried sand (free from mud, clay, and harmful impurities), and other multi-functional additives.
APPLICATIONS OF DRY MORTAR TPI MORTAR GP75
TPI Mortar GP 75 This is a versatile, ready-mixed dry mortar grade 75#, specifically designed for laying regular bricks, plastering/spraying walls, and covering floors indoors and outdoors.
ADVANTAGE TPI MORTAR GP75
- Mortar free of impurities has a lifespan 2-3 times longer than traditional mortar.
- Easy to use, reduces construction time due to pre-selected aggregates.
- Reduce the time spent cleaning and transporting waste out of the building.
- Suitable for indoor and outdoor use.
- Cost savings on materials due to better proportioning compared to traditional mortar.
- Environmentally friendly.
SPECIFICATIONS
| Target | TPI Mortar GP 75 |
| Ingredient | Cement, sand, additives… |
| Shape/Color | Cement gray powder |
| Proportion | 1,500 – 1,700 kg/m3 |
| Compressive strength | ≥ 7.5 Mpa (28 days) |
| Water mixing ratio | 18 – 20% (by weight)
Approximately 4.5 – 5.0 liters of clean water per 25 kg bag of powder. |
| Standard | Consumption depends on the surface roughness of the substrate.
Coverage: ~20.5 kg/1m2/1 cm thickness. |
| Construction temperature | 8 – 40oC |
| Specifications | 25 kg bag |
| Expiry | 12 months (when unopened) |
| Storage | A cool, dry, shady place. |
INSTRUCTIONS FOR USE TPI MORTAR GP75
Surface preparation
- The surface must be solid, clean, and free of oil, grease, dirt, and other contaminants that could affect adhesion. Remove any loose or adherent material using sandblasting or high-pressure water jetting. The absorbent surface must be saturated with water, and no standing water should be allowed on the substrate.
Mix the products
- Pour the flour in slowly. TPI Mortar GP 75 Pour 4.5 – 5.0 liters of clean water into a container and mix thoroughly with a mixer for 3-5 minutes until a homogeneous mixture is formed. Then, let it stand for 1-2 minutes to allow the compounds in the mixture to react with each other, mix again for 1 minute, and then use.
Product manufacturing
- Use a foam trowel to apply and smooth the mortar finish. TPI Mortar GP 75.
Toilet
- Rinse tools thoroughly with water immediately after use. Hardened mortar can only be removed by mechanical means.
HEALTH AND SAFETY INFORMATION
Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, should be worn when using this product. It may cause allergic reactions upon contact with eyes, skin, or mucous membranes. Ecology: Do not dispose of into water sources or soil.
Transport: Not dangerous.
Important note
TPI Mortar GP 75 Because it has a cement base, it is alkaline. Care should be taken to minimize direct contact with skin. If the product gets into the eyes, rinse immediately with clean water and consult a doctor.
Refer to the product's Material Safety Data Sheet (MSDS) and other relevant safety data sheets.
Reviews
There are no reviews yet.