TPI REPAIR RF – Thin-coated concrete repair mortar (> 40Mpa)

TPI Repair RF
Concrete repair mortar with a fine, thin coating (> 40Mpa)

DESCRIBE

TPI Repair RF It is an improved, one-component, cement-polymer mortar containing silica fume.

APPLICATIONS of TPI Repair RF Mortar

• TPI Repair RF It is used as a mortar to repair minor defects on surfaces such as concrete, plaster, and stone.
• TPI Repair RF It is a surface finishing mortar designed to minimize surface imperfections caused by formwork removal, honeycomb voids, and is very suitable for minor repair work on: Precast concrete elements, concrete with a fine surface finish, columns and beams…
• TPI Repair RF It is a leveling mortar and finishing coat for concrete, patching mortar, and screed mortar.

ADVANTAGE TPI Repair RF Thin-Layer Plaster

• Easy to use, just mix with clean water.
• Excellent construction properties.
• Rapid growth rate.
• Good mechanical strength.
• It adheres very well to the substrate surface.
• There are no corrosive agents.
• Non-toxic, non-corrosive.

SPECIFICATIONS

Target	TPI Repair RF
Ingredient	Cement and additives
Shape/Color	Cement gray powder
Density	Bulk density of powder: ~1.25 kg/liter The bulk density of freshly mixed mortar: ~2.05 kg/liter
Compressive strength  (ASTM C349)	≥ 6Mpa (1 day) ≥ 40Mpa (28 days)
Flexural tensile strength	≥ 6 MPa (28 days) (ASTM C348)
Adhesion strength	≥ 1.5 MPa (28 days) (ASTM D4541)
Water mixing ratio	23 – 25% (by weight) Approximately 4.6 – 5.0 liters of clean water are needed for one 20 kg bag of powder.
Output	20 kg bag of powder ~ 12.2 liters of mortar; 82 20 kg bags ~ 1 m³ of mortar
Construction temperature	5 – 40oC
Construction time	~30 minutes (at +27°C/relative humidity 65%)
Layer thickness	Maximum: 2 mm
Specifications	20 kg bag
Expiry	12 months (when unopened)
Storage	A cool, dry, shady place.

INSTRUCTIONS FOR USE TPI Repair RF Mortar

Surface preparation

• All concrete and mortar substrates must be clean, solid, and free of oil, grease, and other contaminants. Loose debris and dust must be removed from the surface.
• After treatment, the surface must be thoroughly moistened with clean water until it is completely saturated, but without standing water.

Mix the products

• The powder is added gradually to the pre-measured container of water until the desired consistency is achieved.

• When using an electric mixer, mix at a low speed (maximum 500 rpm) for at least 3 minutes.

Product manufacturing

• Construction TPI Repair RF Using a trowel or spatula, apply the mixed mortar to the substrate surface while it is still saturated and surface-dry. Compact the material firmly around the edges of the repair area and work gradually towards the center.

Maintenance

• To achieve optimal performance, proper curing of cement-based materials is crucial. In warm or windy weather, basic curing measures (covering with tarpaulins or damp burlap) should be implemented to prevent the mortar from drying out too quickly.

Toilet

• Rinse tools thoroughly with water immediately after use. Hardened mortar can only be removed by mechanical means.

HEALTH AND SAFETY INFORMATION

Occupational safety and health: Appropriate personal protective equipment, including safety glasses and gloves, should be worn when using this product. It may cause allergic reactions upon contact with eyes, skin, or mucous membranes.

Ecology: Do not dispose of in sewage systems.

Transport: Not dangerous.

Dispose of: According to local regulations.

Refer to the Product Safety Data Sheet (MSDS) before use.