TPI HARD P – Concrete floor leveling and hardening powder
Dry powder screeds help to harden the surface of floors and concrete slabs, increasing abrasion resistance and thus minimizing dust formation during use. They are used in areas such as:
- Warehouses, factories
- Parking lot, garage, dock
- Basement floor, working platform
Standard: ~ 4 – 7 kg/m2
ColorGray, green, or as requested.
Pack: 25 kg bag
TECHNICAL DOCUMENTATION
TPI HARD S – Concrete Hardener & Curer (Sodium Silicate)
A clear (metal-free) liquid used for curing, hardening, and coating fresh or hardened concrete in the following applications:
• Old or new horizontal concrete surfaces such as warehouses, industrial plants, shopping centers, and parking areas.
• Suitable for indoor or outdoor applications
Standard: 4 – 7 m2 / liter / coat
Pack: 25-liter / 200-liter / 1000-liter drums
TPI JOINT PANEL – Mortar for treating joints in concrete wall panels
TPI Joint Panel This is a ready-mixed dry mortar product used for treating joints in various types of concrete wall panels. The product helps increase the bonding of wall panels, creating a monolithic connection and sealing gaps between concrete wall panels in indoor and outdoor areas.
Water dilution ratio: 19 – 22% (by weight) ~ 4.75 – 5.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI LATEX P100 – Waterproofing and bonding additive
TPI Latex P100 It is a high-grade emulsion that enhances the quality of cement mortar, such as:
• Oil-based mortar layer. Thin patching mortar layer.
• Tile adhesive mortar, masonry mortar
• Waterproof plaster layer, floor screed layer
• Concrete repair mortar, abrasion-resistant primer
Packaging: 5-liter / 25-liter containers
TPI LC-100 – Foaming additive for lightweight concrete
Fine foaming additives are used for the following applications:
• Lightweight concrete
• Insulating mortar (for roof slabs)
• Filling for non-load-bearing structural elements (ceilings, walls, etc.)
Dosage:
• 0.5 – 2.0% by weight of cement
Pack: 25-liter / 200-liter / 1000-liter drums
TPI LITE – Waterproofing additive for mortar with high workability.
The TPI mortar base is highly suitable for waterproofing mortar structures in areas where hydraulic pressure is not apparent.
- Improve the quality and reduce cracking in mortar mixtures.
- Suitable for harsh weather conditions and coastal environments.Standard ratio: 1 – 2 % based on cement weight.
- Packaging: 5-liter / 25-liter containers
TPI MORTAR GP 100 – Multipurpose ready-mix dry mortar, Grade 100#
TPI Mortar GP 100 TPI Mortar GP 100 is a high-quality, pre-mixed, factory-packaged dry mortar, grade 100#. It is specifically designed for bricklaying.
Typically, plastering/spraying walls and floor coatings are done indoors and outdoors.
Compressive strength: ≥ 10 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI MORTAR GP 75 – Multipurpose ready-mix dry mortar Grade 75#
TPI Mortar GP 75 This is a versatile, ready-mixed dry mortar grade 75#, specifically designed for laying regular bricks, plastering/spraying walls, and coating floors indoors and outdoors.
Compressive strength: ≥ 7.5 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI MORTAR RP – Fiber-reinforced concrete repair mortar
• Rapid repair of vertical and horizontal mortar and concrete surfaces above or below ground.
• Grout for filling/repairing areas with voids, honeycomb structures, etc.
• Repairing damaged and chipped concrete caused by corroded reinforcing steel.
• Repairs and simultaneously increases resistance to oil, chemicals, waste materials, etc.
• Bonding layer in concrete repair systems
Water dilution ratio: 16-18%
Packaging: 25kg bag
TPI MORTAR SP – Bonding and corrosion protection mortar for reinforcing steel
• It is a treatment method to prevent further corrosion of reinforcing steel in concrete.
• Bonding layer in concrete repair systems
Standard:
• Compressive strength: ≥ 45Mpa (28 days)
• Flexural tensile strength: ≥ 4 MPa (28 days)
• Adhesion strength: ~1.5Mpa (28 days)
Water dilution ratio: 16-18%
Packaging: 25kg bag
TPI PRIMER FS – Two-component, solvent-free epoxy primer
• Primer for concrete, cementitious screed, and epoxy screed surfaces.
• Suitable for surfaces with low to high absorbency.
• Primer coat for epoxy flooring systems.
• Binder for self-leveling mortars and plasters.
Standard: 0.2 kg / m2 / layer
Pack: 20 kg / 30 kg set
TPI PRIMER MB – Two-component epoxy moisture-resistant primer
• Primer for concrete, cementitious screed, and epoxy screed surfaces.
• Suitable for surfaces with low to high absorbency >4.5%
• Primer coat for epoxy flooring systems.
• Binder for self-leveling mortars and plasters.
Standard: 0.2 kg / m2 / layer, 1 – 2 layers
Pack: 15kg set: Part A: 10kg/carton, Part B: 5kg/carton
