TPI REPAIR HS – High-strength concrete repair mortar (>70 Mpa)
• Repairing minor surface defects: Concrete, mortar, stone, etc.
• Suitable for minor repair work, for surface defects caused by formwork removal, honeycomb voids on: Precast concrete elements, smooth concrete surfaces, columns and beams…
• Used as a leveling and finishing layer for concrete, patching mortar, and screed mortar.
Water dilution ratio: 20-22%
Packaging: 20kg bag
TPI REPAIR RF – Thin-coated concrete repair mortar (> 40Mpa)
Repairing minor surface defects: Concrete, mortar, stone, etc.
• Suitable for minor repair work, for surface defects caused by formwork removal, honeycomb voids on: precast concrete elements, concrete, columns, beams…
• Used as a leveling and finishing mortar for concrete, patching mortar, and screed mortar.
Water dilution ratio: 23-25%
Packaging: 20kg bag
TECHNICAL DOCUMENTATION
TPI RESURFACE 1331 – High-strength self-leveling mortar (outdoor)
Pre-mixed cement-based self-leveling mortar. High strength and designed for outdoor use.
• Mortar coating for leveling concrete floor surfaces
• Mortar coating to protect the waterproofing layer
Compressive strength: ≥ 10 Mpa (1 day)
Water dilution ratio: 16 – 18% (by weight) ~ 4.0 – 4.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI RS-600C – Concrete surface inhibitor (liquid, horizontal)
TPI RS-600C is designed as a liquid for horizontal application. It is specifically used for creating rough finished surfaces, exposing aggregates, or creating strong bonds for construction joints, edges, and areas where subsequent plaster layers will be applied.
• Coverage rate: 0.25 – 0.3 liters / m2
• Packaging: 5-liter / 25-liter / 200-liter containers
TPI RS-600F – Concrete surface inhibitor (viscous form – vertical)
TPI RS-600F is designed as a viscous paste for vertical application to formwork. It is specifically used for creating rough finished surfaces, exposing aggregates, or creating strong bonds for construction joints, edges, and areas where subsequent plaster layers will be applied.
• Coverage: ~0.3 kg / m2
• Packaging: 20 kg carton
TPI SB140 – Two-component, solvent-based epoxy floor paint
Colored coatings for concrete and screed floors subjected to low to high loads, such as:
• Floors for warehouses, halls, workshops, repair and maintenance areas, garages, ramps, etc.
• Suitable for applications in water tanks, food processing plants, wastewater treatment environments, etc.
Standard: 0.2 – 0.4 m2 / liter / coat
Pack: 20 kg / 30 kg set
TPI SC-100 – Release agent for prestressed piles and centrifugal concrete columns
TPI SC-100 This is a specialized product for dismantling various types of prestressed centrifugal concrete pile molds, power pole concrete, and nodular piles, in steam-cured centrifugal technology. It makes mold dismantling and cleaning easier.
• Mixing ratio: 5–8 times water.
• Packaging: 25-liter / 200-liter / 1000-liter drums.
TPI SEAL 100 – Cement-based wall waterproofing
Liquid waterproofing agent for vertical wall surfaces, highly UV resistant, and withstands harsh weather conditions. Mixing with cement enhances two-way waterproofing capabilities.
• The open roofs have a slope.
• Surface finish
• Sealing joints and screw holes for various types of roofing (tiles, asbestos, galvanized steel).
• The foundation walls on the roof
Coverage: 0.5 kg / m² / layer (Minimum 2 layers)
Mixing ratio: 1 kg TPI Seal-100 + 1 kg cement + 0.5 kg water
Packaging: 1 kg / 5 kg / 20 kg.
TPI SEAL 102 – Cement-based floor waterproofing
Liquid waterproofing agent applied to horizontal floor surfaces. After mixing with cement, it forms a waterproofing mortar used to seal capillary pores on concrete surfaces as well as cement-based surfaces. Used for waterproofing the following items:
• Concrete roof
• Balcony, rooftop
• Sanitary areas, wet areas
Coverage: 0.5 kg / m² / layer (Minimum 2 layers)
Mixing ratio: 1 kg TPI Seal-102 + 1 kg cement + 0.5 kg water.
Packaging: 1 kg / 5 kg / 20 kg.
TPI SEAL S – Premium solvent-based floor gloss coating
Creates a high-gloss, dust-repellent, easy-to-clean protective coating for materials directly exposed to sunlight, with high durability:
• Chemical-resistant floor coatings for gas stations, polished concrete floors, and ground concrete floors.
• Material surfaces requiring gloss coating and enhanced mechanical properties, such as ceramics, clay, etc.
• Cement and concrete surfaces for interior and exterior use: panels, wall slabs, roof tiles, cement roofs, tables, chairs, concrete planters, etc.
Standard: 0.1 – 0.3 m2 / liter / coat
Pack: 5-liter / 20-liter drums
TPI Sealant Primer – Primer for sealant
Primer coating for porous substrates (e.g., concrete) and metal surfaces before applying PU sealant, MS sealant, etc.
Standard:
• Porous, hollow substrate surface: 5 m²/liter or 250 linear meters/liter
• Coverage for dense substrates: 8 m²/liter or 400 linear meters/liter
Water dilution ratio: Part A : Part B = 3 : 1 (by weight)
Pack: 1 / 3 / 5 / 20 liters
TPI Self-Leveling 300 – Cement-Based Self-Leveling Mortar
High-strength, ready-mixed, cement-based self-leveling mortar for interior use. Creates a smooth surface for:
• Lay tiles or carpet on top using adhesive.
• Prepare a smooth surface before applying epoxy or polyurethane paint.
• Mortar coating before applying polished floor
Compressive strength: ≥ 10 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
