Showing all 4 results
TPI CURING S – Silicate-based concrete curing compound
A compound that cures and forms a thin film coating on the concrete surface to prevent premature water evaporation:
• Prepare the vertical surfaces that will receive the next construction steps.
• TPI Curing S can be applied to "fresh" concrete to increase the density of cured concrete and thus increase its strength.
• Coverage: 4-5 m2 / liter
• Packaging: 5-liter / 25-liter / 200-liter containers
TECHNICAL DOCUMENTATIONTPI PROTECT S – Steel rust remover
TPI PROTECT S It is an active ingredient used to remove rust from the surface of iron and steel, thereby reducing the time and cost of cleaning iron and steel surfaces before pouring concrete using conventional mechanical methods.
• Coverage: 10 – 20 m2/liter (depending on application technique and rust thickness).
• Packaging: 5-liter / 25-liter containers
TPI RS-600C – Concrete surface inhibitor (liquid, horizontal)
TPI RS-600C is designed as a liquid for horizontal application. It is specifically used for creating rough finished surfaces, exposing aggregates, or creating strong bonds for construction joints, edges, and areas where subsequent plaster layers will be applied.
• Coverage rate: 0.25 – 0.3 liters / m2
• Packaging: 5-liter / 25-liter / 200-liter containers
TPI RS-600F – Concrete surface inhibitor (viscous form – vertical)
TPI RS-600F is designed as a viscous paste for vertical application to formwork. It is specifically used for creating rough finished surfaces, exposing aggregates, or creating strong bonds for construction joints, edges, and areas where subsequent plaster layers will be applied.
• Coverage: ~0.3 kg / m2
• Packaging: 20 kg carton
