TPI JOINT PANEL – Mortar for treating joints in concrete wall panels
TPI Joint Panel This is a ready-mixed dry mortar product used for treating joints in various types of concrete wall panels. The product helps increase the bonding of wall panels, creating a monolithic connection and sealing gaps between concrete wall panels in indoor and outdoor areas.
Water dilution ratio: 19 – 22% (by weight) ~ 4.75 – 5.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TECHNICAL DOCUMENTATION
TPI MORTAR GP 100 – Multipurpose ready-mix dry mortar, Grade 100#
TPI Mortar GP 100 TPI Mortar GP 100 is a high-quality, pre-mixed, factory-packaged dry mortar, grade 100#. It is specifically designed for bricklaying.
Typically, plastering/spraying walls and floor coatings are done indoors and outdoors.
Compressive strength: ≥ 10 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI MORTAR GP 75 – Multipurpose ready-mix dry mortar Grade 75#
TPI Mortar GP 75 This is a versatile, ready-mixed dry mortar grade 75#, specifically designed for laying regular bricks, plastering/spraying walls, and coating floors indoors and outdoors.
Compressive strength: ≥ 7.5 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI RESURFACE 1331 – High-strength self-leveling mortar (outdoor)
Pre-mixed cement-based self-leveling mortar. High strength and designed for outdoor use.
• Mortar coating for leveling concrete floor surfaces
• Mortar coating to protect the waterproofing layer
Compressive strength: ≥ 10 Mpa (1 day)
Water dilution ratio: 16 – 18% (by weight) ~ 4.0 – 4.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI Self-Leveling 300 – Cement-Based Self-Leveling Mortar
High-strength, ready-mixed, cement-based self-leveling mortar for interior use. Creates a smooth surface for:
• Lay tiles or carpet on top using adhesive.
• Prepare a smooth surface before applying epoxy or polyurethane paint.
• Mortar coating before applying polished floor
Compressive strength: ≥ 10 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI SKIMCOAT – Smooth plaster for wall and ceiling surfaces
This is a high-quality cement-based surface coating material used to create a smooth finish for walls and ceilings with high adhesion. It is suitable for indoor and outdoor surfaces such as concrete, lightweight concrete, precast concrete slabs, brick walls, undersides of arches, block walls, autoclaved aerated concrete blocks, and plaster.
Water dilution ratio: 28 – 30% (by weight) ~ 5.6 – 6.0 liters of clean water for 1 bag of 20 kg powder
Pack: 20kg bag
TPI THINJOINT E33 – Pre-packaged lightweight brick mortar, cement-based.
TPI ThinJoint E33 This is a high-quality cement-based adhesive mortar specifically designed for bonding autoclaved aerated concrete (ALC) panels, autoclaved aerated concrete (AAC) blocks, and panel systems. The product is suitable for both indoor and outdoor applications.
Compressive strength: ≥ 7.5 Mpa (28 days)
Water dilution ratio: 22 – 25% (by weight) ~ 5.5 – 6.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
