TPI DS-AQUA 02 Release Agent for Centrifugal Concrete Pile and Pole
BENEFITS OF TPI DS-AQUA 02 MOLD RELEASE AGENT
Key features of TPI DS-AQUA 02 centrifugal mold release oil:
– Easy to use and highly cost-effective.
– Ensure a beautiful, smooth concrete surface finish.
– Reduces equipment cleaning time.
– Increase production efficiency
– Increase the lifespan of formwork.
DS-AQUA 02 MOLD RELEASE APPLICATION
With its ability to create a non-stick film between the concrete surface and the formwork, TPI DS-AQUA 02 centrifugal release agent is perfectly suitable for formwork in products such as Prestressed centrifugal concrete piles, centrifugal concrete utility poles.
TPI DS-AQUA 02 TECHNICAL SPECIFICATIONS
| Indicators | DS-AQUA 02 | Standard |
| Color | Dark gold | |
| Density (g/cm³)3) | 0.99 +/- 0.05 | ASTM D 4052 |
| PH | 9.1 | ASTM D 1287-11 |
| Solid content (%) | >0.09% | ASTM D 893-14 |
| Dynamic viscosity at 40°CoC (cP) | 1 116 | ASTM D 2196-99 |
TPI DS-AQUA 02 USER MANUAL
– Surface preparation: The formwork surface must be clean. Free from old concrete.
– Prepare the equipment: The equipment must be thoroughly cleaned. Stir the product well before use.
– Instructions: Apply a thin, even layer to the formwork surface using a brush or roller.
– Hygiene: Clean all tools and equipment with clean water and solvent immediately after use.
DOSAGE INSTRUCTIONS FOR TPI DS-AQUA 02
– To increase effectiveness, TPI DS-AQUA 02 mold release agent can also be diluted with water at a certain ratio.
Separate formwork for each product type.
– TPI's technical consulting department will advise on the appropriate blending ratio based on the actual production conditions of each factory.
Reference water dilution ratio chart:
| Product | Water dilution ratio |
| Centrifugal piles | |
| Ø > 600 mm | Mix with 5 times |
| 450mm ≤ Ø ≤ 600mm | Mix with 8 times |
| Ø ≤ 400 mm | Mix with 10 times |
| Centrifugal electric pole | From 10 to 12 times |
Safe
Provide personal protective equipment during the transportation and use of the product.
Rinse immediately with clean water if the product comes into contact with eyes and mouth.
Pack
Centrifugal mold release agent is packaged in 25L cans/200L drums/1000L tanks.
How to store TPI DS-AQUA 02
Store in a cool, dry place.
No danger during transportation.
Reviews
There are no reviews yet.