TPI AL01 – Protective coating for aluminum formwork
The surface coating effectively isolates the aluminum panel from the concrete, providing a high-gloss film that protects the aluminum from oxidation. It offers durability and adhesion.
Strong adhesion to aluminum surfaces, good abrasion resistance, scratch resistance, and chemical resistance.
Standard: 0.1 – 0.2 kg / m2 / layer
Pack: 20 kg / 200 kg drum
TPI CLEAR COAT – Premium water-based gloss paint
A glossy coating and surface protection layer for materials such as:
• Decorative paint finishes such as interior and exterior wall paint, faux stone paint, textured paint, and wood grain paint enhance the beauty of this type of paint.
• Cement and concrete surfaces (interior and exterior). Ceramics and clay.
• Increases the washability and dust-repelling properties of the material surface.
Standard: 0.1 – 0.2 kg / m2 / layer
Pack: 5 kg / 20 kg box
TECHNICAL DOCUMENTATION
TPI CURING S – Silicate-based concrete curing compound
A compound that cures and forms a thin film coating on the concrete surface to prevent premature water evaporation:
• Prepare the vertical surfaces that will receive the next construction steps.
• TPI Curing S can be applied to "fresh" concrete to increase the density of cured concrete and thus increase its strength.
• Coverage: 4-5 m2 / liter
• Packaging: 5-liter / 25-liter / 200-liter containers
TPI PROTECT S – Steel rust remover
TPI PROTECT S It is an active ingredient used to remove rust from the surface of iron and steel, thereby reducing the time and cost of cleaning iron and steel surfaces before pouring concrete using conventional mechanical methods.
• Coverage: 10 – 20 m2/liter (depending on application technique and rust thickness).
• Packaging: 5-liter / 25-liter containers
TPI Q-DRY – Protective coating for metal and concrete surfaces
Preventing peeling and corrosion from the outside in, which can damage the structure of the metal surface.
• Iron and steel metal surfaces of fences, large iron gates, balconies, and outdoor metal decorative items.
• Protecting metal components on precast concrete structures.
• Painting and marking on concrete surfaces
Standard: 0.2 – 0.5 kg / m2 / layer
Pack: 5 kg / 20 kg box
TPI Q-PAINT 2W – Water-based multi-purpose paint
• Apply paint to the surface of walls and ceilings.
• Paint coating for concrete and cement surfaces.
• Coating for gypsum board, cement board, concrete panels, etc.
Standard: 0.1 – 0.3 kg / m2 / layer
Pack: 5 kg / 20 kg box
TPI RS-600C – Concrete surface inhibitor (liquid, horizontal)
TPI RS-600C is designed as a liquid for horizontal application. It is specifically used for creating rough finished surfaces, exposing aggregates, or creating strong bonds for construction joints, edges, and areas where subsequent plaster layers will be applied.
• Coverage rate: 0.25 – 0.3 liters / m2
• Packaging: 5-liter / 25-liter / 200-liter containers
TPI RS-600F – Concrete surface inhibitor (viscous form – vertical)
TPI RS-600F is designed as a viscous paste for vertical application to formwork. It is specifically used for creating rough finished surfaces, exposing aggregates, or creating strong bonds for construction joints, edges, and areas where subsequent plaster layers will be applied.
• Coverage: ~0.3 kg / m2
• Packaging: 20 kg carton
