TPI FS240 – Two-component, solvent-free self-leveling epoxy coating.
High-hardness, chemical-resistant, abrasion-resistant, and waterproof coating for concrete floors. Suitable for:
- Warehouse floor, hall, workshop, garage...
- Coating for sandblasting systems
- Suitable for applications in water tanks, food processing plants, wastewater treatment plants, etc.
Standard: 0.5 – 0.7 kg/m2/Layer
Pack: 25 kg set
TECHNICAL DOCUMENTATION
TPI HARD LS – Concrete Hardener & Curer (Lithium silicate)
A clear (metal-free) liquid used for curing, hardening, and coating fresh or hardened concrete in the following applications:
• Old or new horizontal concrete surfaces such as warehouses, industrial plants, shopping centers, and parking areas.
• Suitable for indoor or outdoor applications
Standard: 1 – 5 m2 / liter / coat
Pack: 25-liter / 200-liter / 1000-liter drums
TPI HARD P – Concrete floor leveling and hardening powder
Dry powder screeds help to harden the surface of floors and concrete slabs, increasing abrasion resistance and thus minimizing dust formation during use. They are used in areas such as:
- Warehouses, factories
- Parking lot, garage, dock
- Basement floor, working platform
Standard: ~ 4 – 7 kg/m2
ColorGray, green, or as requested.
Pack: 25 kg bag
TPI HARD S – Concrete Hardener & Curer (Sodium Silicate)
A clear (metal-free) liquid used for curing, hardening, and coating fresh or hardened concrete in the following applications:
• Old or new horizontal concrete surfaces such as warehouses, industrial plants, shopping centers, and parking areas.
• Suitable for indoor or outdoor applications
Standard: 4 – 7 m2 / liter / coat
Pack: 25-liter / 200-liter / 1000-liter drums
TPI PRIMER FS – Two-component, solvent-free epoxy primer
• Primer for concrete, cementitious screed, and epoxy screed surfaces.
• Suitable for surfaces with low to high absorbency.
• Primer coat for epoxy flooring systems.
• Binder for self-leveling mortars and plasters.
Standard: 0.2 kg / m2 / layer
Pack: 20 kg / 30 kg set
TPI PRIMER MB – Two-component epoxy moisture-resistant primer
• Primer for concrete, cementitious screed, and epoxy screed surfaces.
• Suitable for surfaces with low to high absorbency >4.5%
• Primer coat for epoxy flooring systems.
• Binder for self-leveling mortars and plasters.
Standard: 0.2 kg / m2 / layer, 1 – 2 layers
Pack: 15kg set: Part A: 10kg/carton, Part B: 5kg/carton
TPI PRIMER SB – Two-component solvent-based epoxy primer
• Primer for concrete, cementitious screed, and epoxy screed substrates
• Primer for epoxy flooring systems
• Suitable for surfaces with low to high absorbency.
• Binder for self-leveling mortars and plasters
Standard: 0.1 – 0.2 m2 / liter / coat
Pack: 20 kg / 30 kg set
TPI PU21 – High-elasticity liquid waterproofing membrane, PU-based.
• Waterproofing membrane for roofs, foundations, balconies, water tanks (exterior), and flowerbeds.
• Waterproofing coating for exterior walls, basements, and foundations.
• A waterproof layer beneath plaster, screed, or tile layers.
Coverage: 0.6 – 0.8 kg / m2 / layer (Minimum 2 layers required)
Packaging: 5 kg / 20 kg cartons
TPI Q-PROOF BITUMEN – Liquid, elastic bitumen-based waterproofing agent.
Underground waterproofing layer for concrete and plaster surfaces.
• Flat roof.
• Balcony.
• Basement, etc…
• Waterproofing for walls.
Coverage: 2.0 kg/m² (for a thickness of approximately 1.1 mm after drying).
Packaging: 4.5 kg / 20 kg cartons.
TPI SB140 – Two-component, solvent-based epoxy floor paint
Colored coatings for concrete and screed floors subjected to low to high loads, such as:
• Floors for warehouses, halls, workshops, repair and maintenance areas, garages, ramps, etc.
• Suitable for applications in water tanks, food processing plants, wastewater treatment environments, etc.
Standard: 0.2 – 0.4 m2 / liter / coat
Pack: 20 kg / 30 kg set
TPI SEAL 102 – Cement-based floor waterproofing
Liquid waterproofing agent applied to horizontal floor surfaces. After mixing with cement, it forms a waterproofing mortar used to seal capillary pores on concrete surfaces as well as cement-based surfaces. Used for waterproofing the following items:
• Concrete roof
• Balcony, rooftop
• Sanitary areas, wet areas
Coverage: 0.5 kg / m² / layer (Minimum 2 layers)
Mixing ratio: 1 kg TPI Seal-102 + 1 kg cement + 0.5 kg water.
Packaging: 1 kg / 5 kg / 20 kg.
TPI SEAL S – Premium solvent-based floor gloss coating
Creates a high-gloss, dust-repellent, easy-to-clean protective coating for materials directly exposed to sunlight, with high durability:
• Chemical-resistant floor coatings for gas stations, polished concrete floors, and ground concrete floors.
• Material surfaces requiring gloss coating and enhanced mechanical properties, such as ceramics, clay, etc.
• Cement and concrete surfaces for interior and exterior use: panels, wall slabs, roof tiles, cement roofs, tables, chairs, concrete planters, etc.
Standard: 0.1 – 0.3 m2 / liter / coat
Pack: 5-liter / 20-liter drums
