TPI EPOTAR 100 – Two-component epoxy coating, coal tar resin
Solvent-based epoxy waterproofing coating, chemical resistant for:
• Underground structures.
• Septic tank.
• Wastewater treatment plant.
Standard: ~ 0.2 – 0.4 kg / m2 / layer (Minimum 2 layers required)
Water dilution ratio: Part A : Part B = 5.7 : 1 (By weight)
Pack: 20 kg / Set (A+B)
TECHNICAL DOCUMENTATION
TPI EPOTAR 200 – Two-component, solvent-free epoxy coating, coal tar resin.
Solvent-free, chemical-resistant epoxy waterproofing coating for:
• Underground structures
• Septic tank
• Wastewater treatment plant
Standard: ~ 0.2 – 0.4 kg / m2 / layer (minimum 2 layers)
Water dilution ratio: Part A : Part B = 3 : 1 (by weight)
Pack: 20 kg / Set (A+B)
TPI LATEX P100 – Waterproofing and bonding additive
TPI Latex P100 It is a high-grade emulsion that enhances the quality of cement mortar, such as:
• Oil-based mortar layer. Thin patching mortar layer.
• Tile adhesive mortar, masonry mortar
• Waterproof plaster layer, floor screed layer
• Concrete repair mortar, abrasion-resistant primer
Packaging: 5-liter / 25-liter containers
TPI MORTAR RP – Fiber-reinforced concrete repair mortar
• Rapid repair of vertical and horizontal mortar and concrete surfaces above or below ground.
• Grout for filling/repairing areas with voids, honeycomb structures, etc.
• Repairing damaged and chipped concrete caused by corroded reinforcing steel.
• Repairs and simultaneously increases resistance to oil, chemicals, waste materials, etc.
• Bonding layer in concrete repair systems
Water dilution ratio: 16-18%
Packaging: 25kg bag
TPI MORTAR SP – Bonding and corrosion protection mortar for reinforcing steel
• It is a treatment method to prevent further corrosion of reinforcing steel in concrete.
• Bonding layer in concrete repair systems
Standard:
• Compressive strength: ≥ 45Mpa (28 days)
• Flexural tensile strength: ≥ 4 MPa (28 days)
• Adhesion strength: ~1.5Mpa (28 days)
Water dilution ratio: 16-18%
Packaging: 25kg bag
TPI Q-FIX 121 – Two-component epoxy resin-based adhesive
• Thin, strong bonding layer.
• Can be used on concrete, iron, steel, aluminum, ceramic tiles, wood, glass, polyester, epoxy, etc.
• Repairing concrete, filling holes or cracks in the surface.
• Adhesive for reinforcing steel bars.
Rating: Depends on the size of the connection surface.
Packaging: 1 kg / 3 kg / 5 kg / 24 kg sets
TPI Q-FIX 122 – Two-component, moisture-resistant epoxy injection sealant
Used for injecting and filling holes, cavities, and cracks in structures such as columns, beams, foundations, floors, and water-retaining structures. The product not only forms an effective barrier against water penetration but also acts as a bonding layer between concrete components, thereby restoring the original strength of the concrete structure.
Packaging: 1kg / 3kg / 12kg / 15kg sets
TPI Q-FIX PRIMER – Two-component epoxy resin-based bonding agent
• Provides a permanent bond for fresh mortar or concrete to hardened concrete, bricks, tiles, steel, or other mixed building materials.
• TPI Q-Fix Primer is also used to fill hairline cracks and as a protective coating for steel components, such as anchor bases.
Rating: Depends on the size of the connection surface.
Packaging: 1 kg / 3 kg / 5 kg / 24 kg sets
TPI REPAIR HS – High-strength concrete repair mortar (>70 Mpa)
• Repairing minor surface defects: Concrete, mortar, stone, etc.
• Suitable for minor repair work, for surface defects caused by formwork removal, honeycomb voids on: Precast concrete elements, smooth concrete surfaces, columns and beams…
• Used as a leveling and finishing layer for concrete, patching mortar, and screed mortar.
Water dilution ratio: 20-22%
Packaging: 20kg bag
TPI REPAIR RF – Thin-coated concrete repair mortar (> 40Mpa)
Repairing minor surface defects: Concrete, mortar, stone, etc.
• Suitable for minor repair work, for surface defects caused by formwork removal, honeycomb voids on: precast concrete elements, concrete, columns, beams…
• Used as a leveling and finishing mortar for concrete, patching mortar, and screed mortar.
Water dilution ratio: 23-25%
Packaging: 20kg bag
TPI Sealant Primer – Primer for sealant
Primer coating for porous substrates (e.g., concrete) and metal surfaces before applying PU sealant, MS sealant, etc.
Standard:
• Porous, hollow substrate surface: 5 m²/liter or 250 linear meters/liter
• Coverage for dense substrates: 8 m²/liter or 400 linear meters/liter
Water dilution ratio: Part A : Part B = 3 : 1 (by weight)
Pack: 1 / 3 / 5 / 20 liters
