TPI GROUT 40 – Multipurpose cement-based grout, shrinkage compensating (>40 Mpa)
TPI Grout 40 Suitable for the following grouting applications:
• Machine foundation (no vibration)
• Pillars in prefabricated structures
• Rail track base, bolt locator, bridge bearing
• Gaps. Cracks, recesses in walls.
• Concrete repair
• Standard quantity: 73 bags ~ 1 m³ of mortar
• Water dilution ratio: 13 – 15%
• Packaging: 25kg bags.
TECHNICAL DOCUMENTATION
TPI GROUT 60 – Multipurpose cement-based grout, shrinkage compensating (>60 Mpa)
Multipurpose cement-based grout, shrinkage compensating. TPI Grout 60 Suitable for the following grouting applications:
• Machine foundation (no vibration)
• Pillars in prefabricated structures
• Rail track base, bolt locator, bridge bearing
• Gaps, cracks, and recesses in walls
• Repairing high-strength concrete
• Standard quantity: 73 bags ~ 1 m³ of mortar
• Water dilution ratio: 11 – 13%
• Packaging: 25kg bags.
TPI GROUT 80 – High-strength shrinkage compensating grout (>80 Mpa)
TPI Grout 80 Designed to resist the normal shrinkage of concrete and mortar while absorbing and minimizing the effects of vibration on the foundation. Some features include:
• Machine foundations, support columns, bridge bearings
• Railway sleepers, locating bolts
• Machine foundation
Standard consumption: 73 bags ~ 1 m³ of mortar.
Water dilution ratio: 11 – 13%
Packaging: 25kg bags.
TPI GROUT UHPC – Ultra-high strength (>120Mpa) shrinkage compensating grout
TPI Grout UHPC Designed for use in specialized applications requiring very high early strength, such as:
• UHPC components
• Wind turbine foundation
• Machine foundation…
Standard consumption: 73 bags ~ 1 m³ of mortar.
Water dilution ratio: 11 – 13%
Packaging: 25kg bags.
TPI JOINT PANEL – Mortar for treating joints in concrete wall panels
TPI Joint Panel This is a ready-mixed dry mortar product used for treating joints in various types of concrete wall panels. The product helps increase the bonding of wall panels, creating a monolithic connection and sealing gaps between concrete wall panels in indoor and outdoor areas.
Water dilution ratio: 19 – 22% (by weight) ~ 4.75 – 5.5 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI MORTAR GP 100 – Multipurpose ready-mix dry mortar, Grade 100#
TPI Mortar GP 100 TPI Mortar GP 100 is a high-quality, pre-mixed, factory-packaged dry mortar, grade 100#. It is specifically designed for bricklaying.
Typically, plastering/spraying walls and floor coatings are done indoors and outdoors.
Compressive strength: ≥ 10 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI MORTAR GP 75 – Multipurpose ready-mix dry mortar Grade 75#
TPI Mortar GP 75 This is a versatile, ready-mixed dry mortar grade 75#, specifically designed for laying regular bricks, plastering/spraying walls, and coating floors indoors and outdoors.
Compressive strength: ≥ 7.5 Mpa (28 days)
Water dilution ratio: 18 – 20% (by weight) ~ 4.5 – 5.0 liters of clean water for 1 bag of 25 kg powder
Pack: 25kg bag
TPI MORTAR RP – Fiber-reinforced concrete repair mortar
• Rapid repair of vertical and horizontal mortar and concrete surfaces above or below ground.
• Grout for filling/repairing areas with voids, honeycomb structures, etc.
• Repairing damaged and chipped concrete caused by corroded reinforcing steel.
• Repairs and simultaneously increases resistance to oil, chemicals, waste materials, etc.
• Bonding layer in concrete repair systems
Water dilution ratio: 16-18%
Packaging: 25kg bag
TPI MORTAR SP – Bonding and corrosion protection mortar for reinforcing steel
• It is a treatment method to prevent further corrosion of reinforcing steel in concrete.
• Bonding layer in concrete repair systems
Standard:
• Compressive strength: ≥ 45Mpa (28 days)
• Flexural tensile strength: ≥ 4 MPa (28 days)
• Adhesion strength: ~1.5Mpa (28 days)
Water dilution ratio: 16-18%
Packaging: 25kg bag
TPI Q-PROOF 828 (2.6:1) – Fiber-reinforced waterproofing mortar
Waterproofing inside and outside the house, in repair work and frost protection:
• Water tanks for domestic use, swimming pools, and fire fighting equipment.
• Wet areas, terraces, and balconies.
• Basements, parking lots. Bridges, retaining walls.
Pack: 18 kg / Set (A+B)
TPI Q-PROOF 8EC (4:1) – Two-component cement-based waterproofing mortar
Waterproofing inside and outside the house, in repair work and frost protection:
• Basement, water tank, rooftop terrace, and balcony.
• Bridges, retaining walls. Wet areas.
• Fill in hairline cracks, not cracks that are actively developing.
Pack: 25 kg / Set (A+B)
TPI Q-PROOF 901 (2:1) – High-quality, two-component waterproofing mortar
Waterproofing inside and outside the house, in repair work and frost protection:
• Water tanks for domestic use, swimming pools, and fire fighting equipment.
• Basement, parking lot.
• Wet areas, terraces, and balconies.
• Bridges, retaining walls.
Packaging: 30 kg / Set (A+B)
