TPI A100 – Acrylic-based waterproofing paint for walls
- Waterproofing exterior walls and retaining walls.
- The open roofs have a slope.
- Surface finish
- Sealing joints and screw holes for various types of roofing (tiles, asbestos, galvanized iron).
- The base of the roof
- Packaging: 4.5 kg / 20 kg cartons
TECHNICAL DOCUMENTATION
TPI AIRCONS 800 – Plasticizer and foaming additive for concrete mortar
Designed for concrete with zero or low slump, commonly used in dry concrete production.
• Creates air bubbles. Helps to produce a smooth and even concrete surface in rotary press concrete production.
• Helps to evenly disperse foam particles in the production of EPS concrete panels.
Dosage: 0.06 – 0.2% by weight of cement
Pack: 25-liter / 200-liter / 1000-liter drums
TPI AL01 – Protective coating for aluminum formwork
The surface coating effectively isolates the aluminum panel from the concrete, providing a high-gloss film that protects the aluminum from oxidation. It offers durability and adhesion.
Strong adhesion to aluminum surfaces, good abrasion resistance, scratch resistance, and chemical resistance.
Standard: 0.1 – 0.2 kg / m2 / layer
Pack: 20 kg / 200 kg drum
TPI AQUA PRIMER – Water-based bonding and waterproofing primer
Used as a bonding primer to enhance the adhesion of polyurethane-based waterproofing coatings on concrete, mortar, plaster, and other substrates.
- Standard consumption: 0.1 – 0.2 kg / m2
- Packaging: 5-liter / 25-liter containers
TPI AQUASIL 100 – Transparent water-based waterproofing (lotus leaf effect)
Transparent membrane waterproofing, moisture barrier, mold and mildew prevention, and increased alkali resistance for:
• Concrete and plaster wall surfaces.
• Red bricks, fired clay tiles. Natural stone.
• Autoclaved aerated concrete (ACC), aerated concrete (ALC), lightweight concrete, EPS...
Coverage: 5 – 30 m2 / liter / coat (Depending on the water absorption of the material).
Ratio: Dilute with water 5–30 times.
Packaging: 5-liter / 25-liter containers
TPI BC-N – Oil-based formwork release agent
Product documentation for TPI BC-N mold release agent.
Formwork is an indispensable tool in the construction industry. TPI BC-N is a release agent for formwork made of wood, aluminum, steel, and oil-based reactive plastics. It facilitates easier formwork removal and cleaning, protecting and extending the lifespan of the formwork.
TPI BC-W – Release agent for aluminum and cast iron formwork
Product documentation for TPI BC-W mold release agent.
Formwork is an indispensable tool in the construction industry. TPI BC-W is a release agent for various types of formwork such as: wooden formwork, aluminum formwork, steel formwork, plastic formwork, and gangform. It facilitates easier dismantling and cleaning of formwork, protects and extends the lifespan of the formwork, and ensures fire safety.
TPI CLEAR COAT – Premium water-based gloss paint
A glossy coating and surface protection layer for materials such as:
• Decorative paint finishes such as interior and exterior wall paint, faux stone paint, textured paint, and wood grain paint enhance the beauty of this type of paint.
• Cement and concrete surfaces (interior and exterior). Ceramics and clay.
• Increases the washability and dust-repelling properties of the material surface.
Standard: 0.1 – 0.2 kg / m2 / layer
Pack: 5 kg / 20 kg box
TPI CRYSTAL 1K – Cement-based, penetrating crystalline waterproofing
• Basement floor slab before pouring fresh concrete, basement
• Surfaces: concrete, plaster (Interior and exterior).
Standard:
• 2 kg/m2 – wet construction method
• 3 – 3.5 kg/m2 – Dry application (Reverse waterproofing)
• 2 kg/m2 – Dry sprinkling method (Positive waterproofing)
Ratio: Mix with water 20 – 22%
Packaging: 20kg bag
TPI CURING S – Silicate-based concrete curing compound
A compound that cures and forms a thin film coating on the concrete surface to prevent premature water evaporation:
• Prepare the vertical surfaces that will receive the next construction steps.
• TPI Curing S can be applied to "fresh" concrete to increase the density of cured concrete and thus increase its strength.
• Coverage: 4-5 m2 / liter
• Packaging: 5-liter / 25-liter / 200-liter containers
TPI DRYCONS 200 – Additive for dry concrete products
Used for concrete with zero or low slump, commonly used in the production of dry concrete products:
• Circular and box culverts with vibrating compression
• Acotec panel manufacturing
• Concrete roof tiles, cement-aggregate bricks
Dosage: 0.4 – 0.8% by weight of cement
Pack: 25-liter / 200-liter / 1000-liter drums
TPI DS-2M – Centrifugal concrete formwork release agent
TPI DS-2M It is a release agent for iron and steel formwork in steam-cured centrifugal technology. Used for the following types of formwork:
• Centrifugal concrete sewer pipes
• Prestressed centrifugal concrete piles, concrete power poles, nodular piles
• Mixing ratio: 4 – 7 times water
• Packaging: 25-liter / 200-liter / 1000-liter drums.
