TPI A100 – Acrylic-based waterproofing paint for walls
- Waterproofing exterior walls and retaining walls.
- The open roofs have a slope.
- Surface finish
- Sealing joints and screw holes for various types of roofing (tiles, asbestos, galvanized iron).
- The base of the roof
- Packaging: 4.5 kg / 20 kg cartons
TECHNICAL DOCUMENTATION
TPI AQUA PRIMER – Water-based bonding and waterproofing primer
Used as a bonding primer to enhance the adhesion of polyurethane-based waterproofing coatings on concrete, mortar, plaster, and other substrates.
- Standard consumption: 0.1 – 0.2 kg / m2
- Packaging: 5-liter / 25-liter containers
TPI AQUASIL 100 – Transparent water-based waterproofing (lotus leaf effect)
Transparent membrane waterproofing, moisture barrier, mold and mildew prevention, and increased alkali resistance for:
• Concrete and plaster wall surfaces.
• Red bricks, fired clay tiles. Natural stone.
• Autoclaved aerated concrete (ACC), aerated concrete (ALC), lightweight concrete, EPS...
Coverage: 5 – 30 m2 / liter / coat (Depending on the water absorption of the material).
Ratio: Dilute with water 5–30 times.
Packaging: 5-liter / 25-liter containers
TPI CRYSTAL 1K – Cement-based, penetrating crystalline waterproofing
• Basement floor slab before pouring fresh concrete, basement
• Surfaces: concrete, plaster (Interior and exterior).
Standard:
• 2 kg/m2 – wet construction method
• 3 – 3.5 kg/m2 – Dry application (Reverse waterproofing)
• 2 kg/m2 – Dry sprinkling method (Positive waterproofing)
Ratio: Mix with water 20 – 22%
Packaging: 20kg bag
TPI LATEX P100 – Waterproofing and bonding additive
TPI Latex P100 It is a high-grade emulsion that enhances the quality of cement mortar, such as:
• Oil-based mortar layer. Thin patching mortar layer.
• Tile adhesive mortar, masonry mortar
• Waterproof plaster layer, floor screed layer
• Concrete repair mortar, abrasion-resistant primer
Packaging: 5-liter / 25-liter containers
TPI LITE – Waterproofing additive for mortar with high workability.
The TPI mortar base is highly suitable for waterproofing mortar structures in areas where hydraulic pressure is not apparent.
- Improve the quality and reduce cracking in mortar mixtures.
- Suitable for harsh weather conditions and coastal environments.Standard ratio: 1 – 2 % based on cement weight.
- Packaging: 5-liter / 25-liter containers
TPI PU21 – High-elasticity liquid waterproofing membrane, PU-based.
• Waterproofing membrane for roofs, foundations, balconies, water tanks (exterior), and flowerbeds.
• Waterproofing coating for exterior walls, basements, and foundations.
• A waterproof layer beneath plaster, screed, or tile layers.
Coverage: 0.6 – 0.8 kg / m2 / layer (Minimum 2 layers required)
Packaging: 5 kg / 20 kg cartons
TPI Q-PROOF 828 (2.6:1) – Fiber-reinforced waterproofing mortar
Waterproofing inside and outside the house, in repair work and frost protection:
• Water tanks for domestic use, swimming pools, and fire fighting equipment.
• Wet areas, terraces, and balconies.
• Basements, parking lots. Bridges, retaining walls.
Pack: 18 kg / Set (A+B)
TPI Q-PROOF 8EC (4:1) – Two-component cement-based waterproofing mortar
Waterproofing inside and outside the house, in repair work and frost protection:
• Basement, water tank, rooftop terrace, and balcony.
• Bridges, retaining walls. Wet areas.
• Fill in hairline cracks, not cracks that are actively developing.
Pack: 25 kg / Set (A+B)
TPI Q-PROOF 901 (2:1) – High-quality, two-component waterproofing mortar
Waterproofing inside and outside the house, in repair work and frost protection:
• Water tanks for domestic use, swimming pools, and fire fighting equipment.
• Basement, parking lot.
• Wet areas, terraces, and balconies.
• Bridges, retaining walls.
Packaging: 30 kg / Set (A+B)
TPI Q-PROOF BITUMEN – Liquid, elastic bitumen-based waterproofing agent.
Underground waterproofing layer for concrete and plaster surfaces.
• Flat roof.
• Balcony.
• Basement, etc…
• Waterproofing for walls.
Coverage: 2.0 kg/m² (for a thickness of approximately 1.1 mm after drying).
Packaging: 4.5 kg / 20 kg cartons.
TPI SEAL 100 – Cement-based wall waterproofing
Liquid waterproofing agent for vertical wall surfaces, highly UV resistant, and withstands harsh weather conditions. Mixing with cement enhances two-way waterproofing capabilities.
• The open roofs have a slope.
• Surface finish
• Sealing joints and screw holes for various types of roofing (tiles, asbestos, galvanized steel).
• The foundation walls on the roof
Coverage: 0.5 kg / m² / layer (Minimum 2 layers)
Mixing ratio: 1 kg TPI Seal-100 + 1 kg cement + 0.5 kg water
Packaging: 1 kg / 5 kg / 20 kg.
